Key takeaways
- The minimum spec is a GTX 770 2GB or R9 280 with 8 GB of RAM.
- The recommended spec is a GTX 1060 6GB or RX 480 4GB with 12 GB of RAM.
- Both tiers need 150 GB of free space, so storage is the first thing to check.
- A GTX 1060 6GB lands near 50 FPS at 1080p on high settings in third-party tests.
- Rockstar states no FPS target for either tier, so every FPS figure here is an estimate.
Can I run Red Dead Redemption 2? The short answer
Can I run Red Dead Redemption 2 on an older PC? Yes, in most cases, since Rockstar set a low floor for this open-world western. The Steam page lists a Core i5-2500K or FX-6300 as the minimum CPU. It also lists a GTX 770 2GB or R9 280, with 8 GB of RAM. That hardware runs the game at 1080p on low settings, which feels playable yet far from smooth. Check your own parts with the free tool: bottleneck calculator.
The game came to PC on 5 November 2019, then reached Steam on 5 December 2019. Rockstar has not changed the official specs since, so the same table still applies in 2026. Note that Rockstar states no resolution or frame-rate target for either tier, so treat both tiers as a floor, not a promise. The table below is the official spec, word for word.
| Minimum | Recommended | |
|---|---|---|
| Operating system | Windows 10 64-bit | Windows 10 64-bit |
| CPU | Core i5-2500K / FX-6300 | Core i7-4770K / Ryzen 5 1500X |
| GPU | GTX 770 2GB / R9 280 3GB | GTX 1060 6GB / RX 480 4GB |
| RAM | 8 GB | 12 GB |
| Storage | 150 GB available space | 150 GB available space |
| Network | Broadband internet connection | Broadband internet connection |
What FPS will each tier give you?
The minimum tier gives you 1080p at low settings, and 30 FPS is a fair expectation for it. No official target exists, so this is an estimate based on the age of the parts. A GTX 770 2GB is a 2013 card, and modern open-world games push it hard. Expect dips in towns, since crowds and draw distance load the GPU most. For a similar open-world test, see this: Can I run Kingdom Come: Deliverance 2?.
The recommended tier is the real starting point for smooth play. Third-party benchmark data puts a GTX 1060 6GB near 50 FPS at 1080p on high settings, and near 60 FPS on medium settings. At 1440p, the same card drops to the 35 to 40 FPS range on high settings, so lower the preset or turn on upscaling. DLSS and FSR both help a lot here, since they render at a lower resolution and sharpen the image.
| GPU | Settings | Estimated FPS | Source |
|---|---|---|---|
| GTX 770 2GB | 1080p, low | About 30 FPS | Estimate, no official target |
| GTX 1060 6GB | 1080p, medium | About 60 FPS | GameGPU data, via gagadget |
| GTX 1060 6GB | 1080p, high | About 50 FPS | GameGPU data, via gagadget |
| GTX 1060 6GB | 1440p, high | 35 to 40 FPS | GameGPU data, via gagadget |
| RTX 3060 class | 1440p, high | 60 FPS or more | Estimate from tier above |
The 150 GB storage problem
Storage is the first thing to check, since both tiers need 150 GB of free space. The base install is 150 GB, yet years of updates can push the total higher, so keep 200 GB free to stay safe. An SSD is not listed as required, but it is strongly advised in 2026. A hard drive loads towns slowly, and textures pop in late as you ride through them.
Free the space before you install, since the game needs the full 150 GB plus room for updates. Delete old games you no longer play, and move recordings and downloads to another drive. If your only free drive is a hard drive, buy even a small SATA SSD first. It fixes more stutter per dollar than any other upgrade here.

RAM: 8 GB runs it, 12 GB plays it well
RAM is the quiet decision in this game, since the tiers jump from 8 GB to 12 GB. The minimum 8 GB runs the game on its own, yet it leaves no room for a browser beside it. The recommended 12 GB gives the game breathing room, and 16 GB is the sweet spot in 2026. Dual-channel RAM matters too, since two sticks give the CPU twice the memory bandwidth of one.
Close your browser and chat apps before you play, since they eat the same RAM your game needs. The graphics card memory matters as well, since the minimum GTX 770 has only 2 GB of VRAM. That small frame buffer forces low texture settings, while a 6 GB card holds high textures with ease. For the full VRAM picture, see this: VRAM limits at 8GB, 12GB and 16GB.
Can I run Red Dead Redemption 2 on a laptop?
Laptops can run the game, yet the GPU name alone misleads you. A laptop GTX 1060 runs slower than a desktop GTX 1060, since laptop chips cap power to fit a thin chassis. Check the wattage of your laptop GPU before you compare it with desktop results. A high-wattage laptop GPU lands near its desktop twin, while a low-wattage version trails far behind.
Valve rates the game as Playable on Steam Deck, which means it runs with some caveats. The Deck needs low settings and upscaling to hold a steady frame rate, so expect 30 FPS rather than 60. Integrated graphics cannot run this game, since no built-in GPU matches a GTX 770 2GB. For another Rockstar open world, see this: GTA 6 on PC preview.
Best budget upgrades if your PC falls short
Upgrade in the order that buys the most frame rate per dollar. Start with the graphics card when your GPU sits below the minimum, since an RTX 3060 class card clears 1080p high settings with ease. Next, fix storage when you still run a hard drive, since an SSD ends the streaming stutter that no GPU can fix. Then add RAM to 16 GB when you multitask. For another demanding open world, see this: Can I run S.T.A.L.K.E.R. 2?.
Upgrade the CPU last, since the game leans on the GPU more than the CPU at 1440p and 4K. A Core i5-2500K still clears the minimum, and a CPU swap means a new motherboard on most older rigs. A modern mid-range card like the GeForce RTX 3060 pairs well with a cheap 6-core CPU, so spend on the GPU first. Check which part holds you back before you spend anything.

The bottom line on Can I Run Red Dead Redemption 2
Can I run Red Dead Redemption 2 on your current PC? Yes, when it clears the minimum spec, and the game stays playable at 1080p on low settings with a GTX 770 class card. For a smooth 60 FPS, aim for the recommended tier instead. That means a GTX 1060 6GB class GPU, 12 GB of RAM, and 150 GB of free space. That tier costs far less than a new PC, yet it delivers the frame rate most players want.
Check your exact parts before you spend, since a single weak link decides the result. Run your CPU and GPU through the cpu gpu bottleneck calculator, then upgrade the part it flags first. The game rewards a balanced rig more than a single flagship part, so spread your budget across the GPU, the SSD, and RAM.
Frequently asked questions
Will a GTX 770 2GB run Red Dead Redemption 2 at 1080p?
Yes, a GTX 770 2GB meets the official minimum spec and runs the game at 1080p on low settings. Expect frame rates near 30 FPS, with dips in towns, since that is the floor the spec implies. A GTX 770 with less memory does not exist, so check your card memory before you buy the game.
Does Red Dead Redemption 2 need 150 GB of storage on PC?
Yes, both the minimum and recommended tiers list 150 GB of available space. Updates since launch can push the total higher, so keep about 200 GB free to stay safe. An SSD is not required on paper, yet it loads towns far faster than a hard drive and cuts texture pop-in.
Can Red Dead Redemption 2 run on 8 GB of RAM?
Yes, 8 GB meets the official minimum and runs the game on its own. The recommended tier asks for 12 GB, and 16 GB is the sweet spot in 2026, so 8 GB leaves no room for other apps. Close your browser and chat apps before you play, and upgrade when you stream or multitask.
Which graphics card runs Red Dead Redemption 2 at 1440p?
An RTX 3060 class card runs the game at 1440p on high settings at 60 FPS or more, based on the tier above the recommended spec. A GTX 1060 6GB still plays at 1440p, yet it drops to 35 to 40 FPS on high settings. Turn on DLSS or FSR when your card supports it, since upscaling buys frame rate.
Does Red Dead Redemption 2 support DLSS and FSR on PC?
Yes, the PC version supports both DLSS and FSR upscaling, and both help a lot on mid-range cards. They render the game at a lower resolution, then sharpen the image back to your screen size. Use DLSS Quality on Nvidia cards or FSR Quality on AMD cards when your frame rate falls short.
Is Red Dead Redemption 2 still worth playing on a GTX 1060 in 2026?
Yes, a GTX 1060 6GB still plays the game well at 1080p, with about 50 FPS on high settings in third-party tests. The card meets the recommended spec, so it clears the bar Rockstar set. It struggles only at 1440p and above, where a newer card earns its keep.
How this guide was prepared
This guide uses the official Steam minimum and recommended specs, read on the store page in November 2026, with Rockstar Support as a second source. Frame rates come from third-party benchmark data, and each figure names its source. Rockstar states no FPS target for either tier, so FPS figures are estimates, not promises. No price appears, since prices move daily.
Last updated: November 17, 2026
