Key takeaways
- The minimum spec is a GTX 1060 6GB or RX 580 with 16 GB of RAM. It targets 1080p at 30 FPS on low settings.
- The recommended spec jumps to an RTX 4070 or RX 7800 XT with 32 GB of RAM.
- An SSD is mandatory at both tiers, with 100 GB of free space.
- TechSpot found that 1440p Ultra needs an RTX 4070 class card for 60 FPS or more.
- A GTX 1060 still plays the game, yet expect low settings and frame rates near 30 FPS.
Can I run Kingdom Come: Deliverance 2? The short answer
Can I run Kingdom Come: Deliverance 2 on a mid-range PC from the last few years? Yes, in most cases, since Warhorse Studios set a low floor for this open-world RPG. The Steam page lists a Core i5-8400 or Ryzen 5 2600 as the minimum CPU. It also lists a GTX 1060 6GB or RX 580, and 16 GB of RAM as the minimum. That hardware runs the game at 1080p and 30 FPS on low settings, which feels playable yet far from smooth. Check your own parts with the free tool: pc bottleneck calculator.
| Minimum | Recommended | |
|---|---|---|
| Operating system | Windows 10 64-bit (or newer) | Windows 10 64-bit (or newer) |
| CPU | Core i5-8400 / Ryzen 5 2600 | Core i7-13700K / Ryzen 7 7800X3D |
| GPU | GTX 1060 6GB / RX 580 | RTX 4070 / RX 7800 XT |
| RAM | 16 GB | 32 GB |
| Storage | 100 GB, SSD required | 100 GB, SSD required |
| DirectX | Version 12 | Version 12 |
| Publisher target | 1080p, 30 FPS, low settings | No target stated on Steam |
What FPS will each tier give you?
The minimum tier gives you 1080p at 30 FPS on low settings, and that is the honest floor. Warhorse also publishes a fuller tier table. Its middle tier aims for 1080p at 60 FPS on medium settings. It asks for a Core i5-13600K or Ryzen 5 7600X, an RTX 3060 or RX 6600 XT, and 24 GB of RAM. That middle tier is the real sweet spot for most players. It doubles the frame rate of the minimum tier without demanding a flagship card.
Published benchmarks back up those tiers. TechSpot tested 35 GPUs across three resolutions and four quality settings. It found that 1440p Ultra needs an RTX 4070, RX 7800 XT, or faster card for 60 FPS or more. At 1440p on medium settings, TechSpot measured about 59 FPS on an RTX 3060 and about 63 FPS on an RTX 4060. PCGamesN tested an RTX 4070 rig and averaged 73.9 FPS at 1080p on its best settings. Its 1% low hit 60.3 FPS, and 1440p on medium settings averaged 73.7 FPS. For a similar open-world test, see this: Can I run Black Myth: Wukong?.
| GPU | Settings | Average FPS | Source |
|---|---|---|---|
| RTX 3060 | 1440p, medium | About 59 FPS | TechSpot |
| RTX 4060 | 1440p, medium | About 63 FPS | TechSpot |
| RTX 4070 | 1080p, best settings | 73.9 FPS | PCGamesN |
| RTX 4070 | 1440p, medium | 73.7 FPS | PCGamesN |
| RTX 4070 / RX 7800 XT | 1440p, ultra | 60 FPS or more | TechSpot |
The 16 GB vs 32 GB RAM question
RAM is the quiet decision in this game, since the tiers jump from 16 GB to 32 GB with no middle step on Steam. The publisher tier table fills that gap with 24 GB for its 1080p medium tier, and that number fits the game well. Kingdom Come: Deliverance 2 streams a large open world with towns, forests, and fields, so memory fills fast when you ride across the map. Close your browser and chat apps before you play, since they eat the same RAM your game needs.
Buy 32 GB if you play with anything else open, and stick with 16 GB only for a clean gaming-only rig. Dual-channel RAM matters too, since two sticks give the CPU twice the memory bandwidth of one. For the full RAM picture in 2026, see this: 16GB vs 32GB RAM in 2026: the shortage.

SSD: the requirement you cannot skip
The SSD rule is the one hard gate in the official specs. Steam lists an SSD as required at both tiers, with 100 GB of free space, and a hard drive does not meet the spec. The game streams its open world from storage as you ride, so a slow drive causes long loads and stutter when new areas load in. A SATA SSD meets the rule, while an NVMe drive loads faster still and costs little more in 2026.
Free the space before you install, since the game needs the full 100 GB plus room for updates. Delete old games you no longer play, and move recordings and downloads to another drive. If your only free drive is a hard drive, buy even a small SATA SSD first. It fixes more stutter per dollar than any other upgrade here.
Can I run Kingdom Come: Deliverance 2 on a laptop?
Laptops can run the game, yet the GPU name alone misleads you. A laptop RTX 4060 runs slower than a desktop RTX 4060. Laptop chips cap power to fit a thin chassis, and that cap costs frame rate. Check the wattage of your laptop GPU, often printed as TGP, before you compare it with desktop results. A 140 W laptop GPU lands near its desktop twin, while a 60 W version trails far behind.
Integrated graphics cannot run this game, since no built-in GPU matches a GTX 1060 6GB. That rules out most thin office laptops and older ultrabooks. For a handheld PC, check the Steam Deck compatibility label on the store page before you buy, since handheld chips sit below the desktop minimum. For another demanding open world, see this: Can I run Starfield?.
Best budget upgrades if your PC falls short
Upgrade in the order that buys the most frame rate per dollar. Start with the graphics card when your GPU sits below the minimum. An RTX 3060 class card reaches the 1080p medium tier at 60 FPS. Next, fix storage when you still run a hard drive, since an SSD ends the streaming stutter that no GPU can fix. Then add RAM to 32 GB when you multitask, since 16 GB leaves no room for a browser beside the game.
Upgrade the CPU last, since the game leans on the GPU more than the CPU at 1440p and 4K. A Core i5-8400 still clears the minimum, and a CPU swap means a new motherboard on most older rigs. For the CPU that fits an RTX 4070, see this: RTX 4070 CPU bottleneck: which CPU you need. To find which part holds you back, read this: how to check GPU bottleneck without software.

The bottom line on Can I Run Kingdom Come: Deliverance 2
Can I run Kingdom Come: Deliverance 2 on your current PC? Yes, when it clears the minimum spec, and the game stays playable at 1080p on low settings with a GTX 1060 class card. For a smooth 60 FPS, aim for the middle tier instead: an RTX 3060 class GPU, 24 GB of RAM, and an SSD. That tier costs far less than the recommended spec, yet it delivers the frame rate most players want.
Check your exact parts before you spend, since a single weak link decides the result. Run your CPU and GPU through the cpu gpu bottleneck calculator, then upgrade the part it flags first. The game rewards a balanced rig more than a single flagship part, so spread your budget across the GPU, the SSD, and RAM.
Frequently asked questions
Will a GTX 1060 6GB run Kingdom Come: Deliverance 2 at 1080p?
Yes, a GTX 1060 6GB meets the official minimum spec and runs the game at 1080p on low settings. Expect frame rates near 30 FPS, with dips in crowded scenes, since that is the target the publisher sets for the minimum tier. A GTX 1060 3GB does not meet the spec, so check your card memory.
Does Kingdom Come: Deliverance 2 need more than 16 GB of RAM?
No, 16 GB runs the game on its own, since it meets the official minimum. The recommended tier asks for 32 GB, and the publisher middle tier asks for 24 GB, so 16 GB leaves little room for other apps. Close your browser and chat apps before you play, and upgrade to 32 GB when you stream, record, or keep tabs open beside the game.
Can Kingdom Come: Deliverance 2 run on a hard drive instead of an SSD?
No, Steam lists an SSD as required at both tiers, so a hard drive does not meet the spec. The game streams its open world from storage as you ride. A hard drive loads new areas too slowly, which causes long loads and stutter. A SATA SSD meets the rule, while an NVMe drive loads faster still and costs little more in 2026.
Which graphics card handles Kingdom Come: Deliverance 2 at 1440p?
An RTX 4070 or RX 7800 XT class card handles 1440p on ultra settings at 60 FPS or more, based on TechSpot testing. An RTX 3060 class card still plays at 1440p on medium settings near 59 FPS, so it suits players who accept medium presets. For 4K, the publisher tier table points to an RTX 4080 Super class card, since 4K needs far more GPU power.
Does Kingdom Come: Deliverance 2 use ray tracing?
No, Warhorse built the game on a heavily customized CryEngine without ray tracing, as TechSpot notes in its benchmark. The game supports DLSS and FSR upscaling instead, and both help a lot at 1440p and 4K. Turn on DLSS Quality or FSR Quality when your card supports it, since upscaling buys frame rate with little visible loss.
Where do I check my parts against the Kingdom Come: Deliverance 2 specs?
List your CPU, GPU, RAM, and storage, then compare each part with the official table in this guide. The weakest part decides your result, so a strong GPU cannot save a CPU below the minimum. Run your exact pair through our bottleneck calculator to see which part limits you, then upgrade that part first. The table above gives you every number you need.
How this guide was prepared
This guide uses the official Steam minimum and recommended specs, read in November 2026, with the publisher tier table for the middle tiers. Frame rates come from TechSpot, which tested 35 GPUs, and PCGamesN, which tested an RTX 4070 rig, and each figure names its source. No FPS figure here comes from a guess, and no price appears, since prices move daily.
Last updated: November 14, 2026
